Parallel testing
Posted: 08 Apr 2021, 09:34
[Question] In BFL setting, what is the difference while PRL_ON = 1 / 0
[Answer] In TB file (test bench),
If PRL_ON = 0, one by one memories group under a controller will be test
If PRL_ON = 1, all memories under a controller will execute memory self-testing simultaneously.
If user needs to test specific memory, the setting in SDI command as following,
PRL_ON = 1
GRP_EN = assign group number which will be test
MEM_ID = assign MEM_ID under the GRP_EN
[Answer] In TB file (test bench),
- test bench.png (176.04 KiB) Viewed 40971 times
- test bench.png (176.04 KiB) Viewed 40971 times
If PRL_ON = 1, all memories under a controller will execute memory self-testing simultaneously.
If user needs to test specific memory, the setting in SDI command as following,
PRL_ON = 1
GRP_EN = assign group number which will be test
MEM_ID = assign MEM_ID under the GRP_EN